To make the HT-5R MkII sound full and toneful even at the lowest volume levels, we designed a low powered push-pull power amp which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression.
The Power Reduction switch takes you down to 0.5 Watts without any compromise in tone: perfect for driving the valve power stage at home or in the studio.
Blackstar’s patented ISF circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. So now you can effectively design your own tone and finally find “the sound in your head”.
The HT-5R MkII also has a fully specified stereo speaker emulated output and USB audio output which allows you to easily record amazing valve tone. It also features the unique 4×12/1×12 voicing switch allowing you to change the tonal characteristics of the emulated signal between two emulated cabinet types. The stereo speaker emulated output can be used at the same time as the internal speaker/extension cab, providing headphone free monitoring or the choice to blend a mic’d speaker and emulated signals together for unrivalled usability when recording at home or in the studio. In addition the speaker output can be turned off for “silent” practice or recording.
Add to this footswitchable Voices for Clean and Overdrive, an XLR D.I. output, effects loop with switchable level, 16Ω and 8Ω speaker outputs which allow you to run the amp into an external speaker cabinet of your choice, and a stereo MP3/Line in allowing you to jam along to your favourite tracks, you have everything you need for recording or practising.
The conventional three way guitar EQ network, or tone stack (a.k.a. Bass, Middle and Treble), is a key to the characteristic “voice” of traditional guitar amplifiers. Classic amplifier designs have their own versions of this network which leads to their own tonal voicings. The ISF control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings in a way that has never before been possible. In this way you can design your own sound and truly find ‘the sound in your head’.
PROFESSIONAL RECORDING CONNECTIVITY
USB output has been added for the simplest way to get valve tone into your recordings. Also added is a pro balanced XLR D.I. output, which allows the speaker emulated signals to be connected to external devices for practising, recording or live use.
Inspired by Blackstar’s patented Dynamic Power Reduction circuit, simply switch down to 0.5 Watts at the push of a button without any loss of tone. Perfect for driving the 12BH7 power stage hard at lower volumes.
Blackstar’s new studio quality reverb has been designed to perfectly complement guitar tones.
The compact cabinet has a 3 degree angle on the front face, top-loader panel and stage-friendly chickenhead knobs giving the HT-5R MkII a stunning boutique style.
– 5 WATT COMBO
– ECC83 PREAMP VALVE, 12BH7 POWER AMP VALVE
– UNIQUE PUSH-PULL POWER AMP DESIGN
– 2 CHANNELS
– FOOTSWITCHABLE VOICES FOR CLEAN AND OVERDRIVE
– POWER REDUCTION TO 0.5 WATTS
– USB AUDIO OUT
– XLR D.I. OUT
– NEWLY VOICED STUDIO QUALITY REVERB
– 1X12 BLACKSTAR DESIGNED SPEAKER
– 2-BUTTON FOOTSWITCH INCLUDED
3 Years Once Registered at: www.blackstaramps.com/uk/uk-warranty